The platform

Run your entire operation on Setpoint.

From edge-level connectivity to operation-wide traceability, Setpoint unifies every signal, asset, and decision in a single, modern platform. Connect faster, configure once, trace everything, and simplify daily work for teams of any size, all while future-proofing your industrial stack.

Connect

Built to Connect Everything

Ready to rethink how you connect?

Whether you’re linking a single machine or integrating across your entire enterprise, Setpoint connects your systems, teams, and data in real time. Built to unify OT and IT from day one, Setpoint makes sure every signal and state flows exactly where it’s needed.

Book a demo Call (716) 452-9002

Protocol ready

Native Industrial Protocol Support

Setpoint speaks the language of your machines right out of the box. Built-in drivers for Modbus TCP, OPC UA, EtherNet/IP, Siemens S7, Beckhoff ADS, and more connect directly to your PLCs and controllers without external adapters, translators, or third-party bridges.

Data streams

Real-Time Data Streaming

Industrial operations require immediacy, not lag. Setpoint streams tag changes with Server-Sent Events (SSE) as they happen, so Live Tags, dashboards, and alarms stay current and operators can respond to issues that affect production or safety.

Offline resilience

Designed for Disconnected Environments

Connectivity isn’t always guaranteed, and Setpoint is built for that. Each edge device logs to its own local time-series database, so history keeps recording when the plant network or internet drops. The same asset model runs at the edge, on servers, and in the cloud.

Configure

Configure Once, Deploy Everywhere

Ready to rethink how you deploy?

Setpoint was built to reflect how industrial systems actually work: structured, repeatable, and evolving. Whether you’re setting up one asset or rolling out configurations across dozens of lines, Setpoint’s modular architecture keeps everything organized and reusable.

Book a demo Call (716) 452-9002

Template driven

Reusable Asset Templates

Stop cloning spreadsheets and hand-mapping points. Define a Frame once with tag patterns and variables, then apply it to every matching asset. When a new machine comes online, apply the Frame and you’re done: every detail inherits the right naming, units, and limits.

No-code configuration

Visual, Validated Editing

Configuration feels like filling out a well-designed form, with no command line required. Inputs are validated before they’re saved, asset group configurations are published as revisions, and Frame definitions are versioned so changes roll out predictably.

Simple hierarchy

Scalable Asset Structure

Plants don’t run as flat lists, and neither should your configuration. Setpoint mirrors your operation (Site → Asset group → Line → Asset) so context is built in. Update a Frame and re-apply it across a group, or pull an existing asset group onto a new edge device.

Trace

Track Your Entire Operation

Ready to rethink your traceability?

Customers and continuous-improvement programs demand a clear story of what happened, when, and why. Setpoint records that story automatically: every tag change is time-stamped, tied to its asset, and stored in one place, so root-cause analysis that once took days takes minutes.

Book a demo Call (716) 452-9002

Audit ready

Complete, Time-Stamped History

Every logged value is captured with its timestamp across machines, lines, and sites. Filter by time window or asset group, and keep years of history with the automatic Parquet archive to local disk and cloud object storage.

Easily categorized

Context-Rich Tagging

Traceability is only useful if it matches how you think about your plant. Every record belongs to a site, asset group, line, and asset, and Tag insights let you group history by any tag, such as shift, recipe, batch, or product, in a couple of clicks.

Data lineage

Signal-to-Decision Trace

Every KPI in Setpoint comes from tags you can inspect: uptime from the line enabled and running signals, heater energy from zone outputs, and alarms from the limits in your Frames. When something goes wrong, the trail from metric back to signal is already there.

Simplify

Simplified Industrial Applications

Ready to rethink industrial simplicity?

Complex tools slow everyone down and rarely solve the actual problem. Setpoint gives operators, engineers, and managers a common workspace that just makes sense, with fewer clicks, no scripts, and effortless updates, so your team can focus on throughput and quality.

Book a demo Call (716) 452-9002

Human-centric

Intuitive Interface

Screens are organized by task, with the critical metrics front and center. Admin and member roles keep configuration in the right hands, a dark interface suits the control room, and the command palette gets you to any asset from the keyboard.

Rapid understanding

Quickly Understand

Setpoint ships as a lightweight container for edge devices, servers, or cloud instances. Network discovery finds your PLCs and L5X import brings in tags, so your first data points appear fast and pilots start delivering value before the next shift change.

Zero-config logging

Complete Data Capture

Forget writing scripts to dump CSVs. Setpoint records every value change with its timestamp out of the box, shows you any tags that aren’t being logged, and emails you if a logging session stops, so nothing slips through the cracks.

The modules

See the parts of the software you’re buying.

Each module below works out of the box. The screens mirror the real Setpoint interface, filled with sample data.

Connect & Log

Every PLC, one data stream

Setpoint Connect talks to the controllers already on your floor and logs every tag change to a time-series database at the edge.

Network discovery and a tag browser for supported PLCs
Import Studio 5000 L5X projects instead of typing tags by hand
Pull rows from SQL databases and images from watched folders
Skip-unchanged logging keeps storage lean without losing history
Live Tags view for real-time values while you commission

Supported connections

Allen-Bradley / Rockwell: ControlLogix / CompactLogix, EtherNet/IP, DF1
Siemens: S7, PROFINET
Beckhoff: ADS / TwinCAT
Emerson: DeltaV
Open protocols: Modbus TCP, OPC UA, CANopen, Open Protocol
Building automation: BACnet/IP, KNXnet/IP
SQL databases: PostgreSQL, MySQL, SQL Server
Media: Watched image folders

Setpoint / Line 3 / Live Tags

Sample data

Live Tags

Line 3 PLC · EtherNet/IPLive stream on

Extruder 1

Extruder

13 tags13 live4 detail groups

Zone 13

Name	Address	Value	Quality	Source
Temperature Actual	L3_EXT1.Zone1.Temp_PV	204.4°C	Good	Live
Temperature Setpoint	L3_EXT1.Zone1.Temp_SP	205°C	Good	Live
Output	L3_EXT1.Zone1.Out_CV	46%	Good	Live

Zone 23

Name	Address	Value	Quality	Source
Temperature Actual	L3_EXT1.Zone2.Temp_PV	214.4°C	Good	Live
Temperature Setpoint	L3_EXT1.Zone2.Temp_SP	215°C	Good	Live
Output	L3_EXT1.Zone2.Out_CV	50%	Good	Live

Zone 33

Name	Address	Value	Quality	Source
Temperature Actual	L3_EXT1.Zone3.Temp_PV	224.4°C	Good	Live
Temperature Setpoint	L3_EXT1.Zone3.Temp_SP	225°C	Good	Live
Output	L3_EXT1.Zone3.Out_CV	54%	Good	Live

Screw4

Name	Address	Value	Quality	Source
Speed	L3_EXT1.Screw.Speed_PV	62rpm	Good	Live
Melt Pressure	L3_EXT1.Melt.Pressure	2,840psi	Good	Live
Running	L3_EXT1.Screw.Running		Good	Live
Recipe	L3_EXT1.Recipe.Name	HDPE-40	Good	Live

Frames & Assets

Model the plant once

Describe a machine type once as a Frame, then apply it to every matching asset. Sites, asset groups, and lines mirror how your plant is actually organized.

Reusable Frames with detail groups, setpoints, and limits
Tag patterns map dozens of PLC addresses in one step
Sites, asset groups, and lines for multi-plant organizations
Versioned frame definitions roll out across the fleet

Setpoint / Frames / Heater zone

Sample data

Frame · Heater zone

v4Applied to 36 assets

Plant 2

Extrusion
Line 3
Zone 1
Zone 2
Zone 3
+ 9 more
Line 4

Detail	Tag pattern	Kind
Actual temperature Process	{line}.Zone{n}.Temp	Number · °C
Setpoint Process	{line}.Zone{n}.SP	Setpoint
High limit Process	{line}.Zone{n}.HiLim	Limit
Heater output Output	{line}.Zone{n}.Out	Number · %
Enabled State	{line}.Zone{n}.En	Boolean

Insights

Answers, not just charts

Purpose-built analytics that turn raw tags into uptime, energy, and quality stories your supervisors can act on.

Uptime insights: productive, quality loss, and stopped time per line
Heater insights: staggered-start savings and predictive heater signals
Tag insights: compare every signal across recipes, shifts, or products
Roll up across lines and sites, including edge devices

Uptime insights
Productive, quality loss, and stopped time from the line enabled and running signals.
Heater insights
Estimated energy, stagger savings, and predictive signals for every heater zone.
Tag insights
Group by any tag, such as recipe, shift, or product, and compare every other signal.

Setpoint / Plant 2 / Line 3 / Heater insights

Sample data

Heater insights

Plant 2 · Line 36 zonesLast 48 hours

Mode: thermalConfidence: high

Stagger score 82/100 — Several heaters often heat up in the same buckets — staggering start times may reduce peak demand.

Recommendations

Stagger heater starts within each asset group

Several heaters often heat up in the same buckets — staggering start times may reduce peak demand.

Estimated impact ~4.20 MWh (primary model)

Uneven preheat timing

First crossing of ~85% of typical temperature spans 1.3 hours across heaters — align start times with true production-ready needs.

Heaters in this asset group

Heater	Est. energy	Est. cost	Health	Power tag
Zone 1	3.30 MWh	$396	88	—
Zone 2	3.70 MWh	$444	88	—
Zone 3	4.30 MWh	$516	68	—
Zone 4	3.90 MWh	$468	88	—
Zone 5	3.60 MWh	$432	88	—
Zone 6	3.10 MWh	$372	88	—

Enabled tagEst.: 4.30 MWhCost: $516Thermal model: 4.30 MWhHealth score: 68Bucket: 10 min

Temperature vs setpoint

Signals

warningWARMUP_SLOWING

Heating rate in the early window tapers more than typical — element aging or supply issues are possible.

infoHIGH_OSCILLATION

Frequent temperature reversals — tuning (hysteresis/PID) or load changes may be worth reviewing.

Alarms

Know before the line stops

Warning and critical alarms built from the limits you already defined, plus alerts when data logging itself goes quiet.

Auto-create alarms from setpoints and limit details
Warning and critical thresholds on temperature, pressure, vibration, efficiency, status, or custom tags
One live list of active alarms across sites and asset groups
Email notification when a logging session stops reporting

Setpoint / Plant 2 / Alarms

Sample data

Active Alarms (4)

All sites

CRITICAL
Line3.Melt.Pressure
Line 3 · Extruder · 3,420 psi > 3,300
Pressure
2 min ago
WARNING
Line3.Zone7.Temp
Line 3 · Zone 7 · 201 °C < 210
Temperature
14 min ago
WARNING
Press4.Bearing.Vib
Press cell A · Press 4 · 7.1 mm/s > 6.5
Vibration
41 min ago
CRITICAL
Chiller2.Return.Temp
Utilities · Chiller 2 · 19.8 °C > 18
Temperature
1 h ago

Dashboards & Reports

The right view for every role

Live dashboards for operators, packaged reports for leadership, and built-in Grafana for engineers who want to dig deeper.

Live process dashboards across assets and lines
Reports with automatic hourly, daily, and weekly rollups
Grafana integration with ready-made dashboard templates
Export-friendly data through a documented REST API

Setpoint / Plant 2 / Reports

Sample data

Reports

Plant 2 · FinishingLast 24 hours30s min/max

Assets

3 selected on other types

Unused (0)

No assets match that search.

Data Visualization

Y-axis: drag the vertical slider on the right, or hold Shift and scroll on the chart. X-axis: bottom slider or scroll on the chart. Numeric series use a 30s min/max envelope so every selected tag fits on the chart. Resolution is 30s (preferred 1s) so all tags stay visible.

Series

State values

OffOn

AI Chat

Ask your plant a question

Chat with your production data in plain language. The assistant uses Setpoint tools to look up sites, assets, and logged values before it answers.

Grounded answers from your assets and logged data
Pick context: a site, asset group, or specific asset
Ask it to compare assets or build a Grafana dashboard for you
Cloud models or local models via Ollama for air-gapped plants
Bring your own AI key per user

Setpoint / AI Chat

Sample data

AI Chat

Context: Line 3

Why was Line 3 down so much on Wednesday?

Line 3 was stopped for 3.7 h on Wednesday, about twice its weekly average. Most of it came from two events:

06:10–07:35 · start-up after a die change. Zone 7 took 38 min longer than usual to reach setpoint.
14:02–15:20 · melt pressure went high and the operator disabled the line.

Zone 7 also shows a slowing warm-up in Heater insights. Want me to pull its temperature trend for the week?

AI Assistant

Ask about your sites, assets, or logged data…

Edge Fleet

Run the plant, manage it centrally

Each line runs on its own edge device. A central server sees every device, pushes configuration, and rolls out updates with automatic rollback.

Edge devices keep logging locally, even when the WAN is down
Central view of every device, its version, and heartbeat
One-click updates with preflight checks and rollback
Parquet archive to local disk and cloud object storage

Setpoint / Edge Devices

Sample data

Edge Devices

4 devicesTarget v0.0.101

Device	Site	Version	Status
Line 1 edge ...499b78	Plant 2 · Akron	v0.0.101	Online 4 s ago
Line 3 edge ...0a7d21	Plant 2 · Akron	v0.0.101	Online 2 s ago
Line 4 edge ...61c4a3	Plant 2 · Akron	v0.0.99	Updating 11 s ago
Press cell A ...2e9b15	Plant 5 · Dayton	v0.0.101	Offline 26 min ago

Platform

The foundations your IT team will ask about.

Role-based access

Admins configure; members view, report, and chat. Enforced on every API call.

Single sign-on

Open REST API

Every screen is backed by a documented API with an OpenAPI reference.

Command palette

Jump to any asset, line, or report from the keyboard.

Ready to simplify your industrial operations?

Book a demo or chat with an engineer to see how Setpoint delivers clarity, context, and control at scale.

Book a demo Explore features